Welcome to the specialty store with handmade products designed by Adam Čeladín and produced in our workshops in the EU.
|Material:||Damascus Steel, VG-10 Steel|
|Thickness (in / mm):||0,94 / 24|
|Length (in / mm):||9,25 / 235|
|Width (in / mm):||0,94 / 24|
|Weight (oz / g):||6,4 / 184|
AceJet presents a handmade fixblade hunting knife that will be the pride of your collection. The Japanese damascus blade with a cutting core out of VG10 steel was combined with a hardwood handle in the MaceMaker artisan workshop.
New products are in the style of "SanMai" (JAP) sandwich construction of the blade. This represent the top technology that gives the knives the best properties from the very logic of the thing. This is reflected in the construction of the most elaborate part of the knife, i.e. the blade itself... Allow us to show you here, in a simple, practical way, the ESSENCE of this technology...
Sustained cutting ability is an ESSENTIAL PROPERTIES in knives. In the case of the so-called "SanMai" blade, it is determined by its very construction. The central "razor blade", which ONLY ENSURES THE PENETRATION OF THE BLADE INTO THE MATERIAL, IS THE HEART OF THE BLADE ... As every heart is protected, this "razor blade" is also protected by an anvil material on the sides, in our case the highest quality "Damascus" steel construction. But we must not forget the fact that the cutting itself (penetration into the material) is 100% dependent on this "razor".
Product is proudly made in Bohemia (EU).